Instructions for attaching graywacke facade stone to a solid plastered wall

Welcome and thank you for your interest in our high-quality greywacke facade stones. To provide you with the best possible service, we have created a detailed step-by-step guide to help you securely and professionally attach your greywacke facade stones (1-3 cm) to a stable plastered wall. This guide is designed to help you achieve the best possible results and ensure the longevity of your cladding.

Introduction of the step-by-step guide

Below you will find a detailed guide on how to attach graywacke facade stones. This guide includes the necessary materials as well as each individual step you should follow to securely and effectively install the stones. By following these steps, you ensure that your facade cladding is not only aesthetically pleasing but also durable and weather-resistant.

The weight of the greywacke facade stone per square meter is approximately 37-40 kg

Guide to attaching graywacke facade stones (1-3 cm) to a solid plastered wall

Materials

  • Flex adhesive (also known as tile adhesive)
  • Masonry trowel
  • Trowel (optional)

Step-by-step guide

  1. Preparation of the wall
    • Make sure that the wall is clean, dry, and stable plastered.
    • Remove any loose plaster or contaminants that could affect adhesion.
  2. Mixing the flexible adhesive
    • Mix the flexible adhesive according to the manufacturer's instructions.
    • The glue should be mixed thickly so that it has a viscous consistency.
  3. Applying the flexible adhesive
    • Apply the flexible adhesive either spot-wise or over the entire surface to the back of the graywacke facade stones. Use the trowel for this purpose.
    • Pointwise: Apply several adhesive dots to the back of the stone.
    • Fully covered: Apply the adhesive evenly across the entire back of the stone. This ensures a stronger and more uniform bond.
  4. Attaching the stones
    • Press the stones coated with glue firmly against the wall. Start at the bottom of the wall and work your way up.
    • Make sure that the stones adhere well and that no cavities are formed.
  5. Grouting
    • Make sure that the joints are completely filled to prevent water ingress and associated frost damage.
  6. Conclusion
    • After grouting, allow the mortar to dry well.
    • Optional: Apply a waterproofing treatment to further protect the stones from weathering effects.

 

If you have any further questions, we are happy to assist you.

Support & Consulting

Opening hours: Mon - Fri from 8 AM - 4 PM
Phone: +49 (0) 3332 26 70 78-27
E-Mail: sales@bruchsteinplatten.com

 

Disclaimer

Please note that the establishment, implementation, compliance, and control of laws, regulations, and official requirements are your responsibility. We, as a supplier of natural stones from quarries, cannot be held liable for non-compliance with legal regulations or construction technical requirements. Due to the natural characteristics of our products, it is neither sensible nor possible to subject each individual stone to an elaborate examination.

We therefore strongly recommend that you check all relevant legal regulations before using our products and, if necessary, seek expert advice.